NOTE: After syncing with the projector you may see your device’s screen being mirrored by the projector. Allow the projector 15 to 20 seconds to fully start up and sync with your device.Power on the projector by flipping the power switch to the on position.If no external speaker is connected, the projector’s internal speaker will be used for audio. If desired, connect a speaker to the 3.5mm audio out jack.NOTE: Some devices may require an adapter to connect to your device. Connect the included HDMI cable to the HDMI port on the projector and the other end to your device.To power the projector with the built-in battery, simply turn the projector on.Once connected, the power indicator light will illuminate red on the projector to show it is connected to power. To power the projector with the Micro USB to USB cable, connect the Micro USB to the projector’s and plug the other end into a USB port.The projector can be powered using the included Micro USB to USB cable or the built-in battery.IMPORTANT: Fully charge the battery before the first use (approximately 3-4 hours). The blue system indicator light will come on if the battery power is getting low. The built-in battery is charged using the included Micro USB to USB cable.

Miroir mp30 micro projector 360p dlp